How to apply vinyl decals using dry method.

By framp882

Rate: (4 Ratings)

There are two ways to apply vinyl decals, the wet and the dry method. This how to covers how to apply vinyl using the dry method.

• Post a Comment
• Add to Favorites
• Email
• Print Article

Save/Share:

Flag Article

Instructions

Difficulty: Moderate

Things You’ll Need:

• vinyl decal
• hair dryer or heat gun

Step 1

Clean the area that the vinyl will be applied. All dirt and wax must be removed to give the vinyl proper surface to adhere to.

Step 2

Remove protective backing from vinyl.

Step 3
Begin to apply vinyl to the vehicle. Make sure that you are ready because once the vinyl is down, it will be very hard to adjust. If you don't feel comfortable with this method, then see my other how to article on how to apply vinyl using the wet method. It allows for the vinyl to be adjusted once it is laid down.

Step 4

Start at one end of the vinyl and work your way to the other end, making sure not to leave any air bubbles on the part that has already been laid.

Step 5

If the surface is curved, then you may have to use a hair dryer or heat gun to stretch the vinyl and make it fit properly.

Step 6

Enjoy your new vinyl.